HobbyKing
TURNIGY MULTISTAR 15 AMP MULTI-ROTOR BRUSHLESS ESC 2-3S
| Constant Current | 15a |
| Input Voltage | 2-3 cells Lipoly |
| BEC | Yes (Switching) |
| BEC Output | 5.5V/2A |
| PWM | 8 KHz |
| PCB Size | 35mm x 13mm |
| Weight | 21g |
Details:, • Smooth and linear throttle control, Specs:, Max RPM:, 240,000rpm for 2 Poles Brushless Motor,
MultiStar ESCs are are a quality speed controller at a ...5 Reviews
HobbyKing
NTM PROP DRIVE 28-30S 800KV / 300W BRUSHLESS MOTOR (SHORT SHAFT VERSION)
| Max current | 20A |
| Max Power | 300W |
| Shaft | 3mm |
| Weight | 65g |
| ESC | 20~30A |
| Cell count | 3s~6s Lipoly |
| Bolt holes | 16mm & 19mm |
Specs:, Model:, NTM Prop Drive Series 28-30A 800kv (short shaft version), Kv:800rpm/v, Bolt thread:M3, Connection:, 3.5mm Bullet-connector, Prop Tests:, 8x4E - 22.2V / 310W / 13.9A / 1.11kg thrust, Note:, An accessory pack is available for this motor. Please see the related items below.,
This is a short shaft version NTM 28-30S 800kv brushless ...5 Reviews
HobbyKing
433MHZ SUPERHETERODYNE 3400 RF TRANSMITTER AND RECEIVER
| Working voltage | 3V~12V |
| Modulation mode | ASK /OOK |
| Frequency error | +150kHz (max) |
| Velocity | ≤10Kbps |
| Self-owned codes | negative |
| Dimensions | 43x12x5mm |
| Working voltage | 5.0VDC +0.5V |
| Working current | ≤2.5mA (5.0VDC) |
| Working principle | superheterodyne |
| Working method | OOK/ASK |
| Sensitivity | excel –105dBm (50Ω) |
| Dimensions | 19x12x5.5mm |
| Weight | 1.6g |
Transmitter Specs:, Working current:, max≤40mA (12V), min≤9mA(3V), Resonance mode:, sound wave resonance (SAW, Working frequency:, 315MHz-433.92MHz, customized frequency is available., Transmission power:, 25mW (315MHz at 12V), Aerial Length:, 24cm (315MHz), 18cm(433.92MHz), Weight:2g, Receiver Specs:, Operating frequency:, 315MHz, 433.92MHz, customized frequency is available;, Bandwidth:, 2MHz (315MHz, having result from testing at lowing the sensitivity 3dBm), Output signal:, TTL electric level signal entire transmit,
433MHz Superheterodyne 3400 RF Transmitter and Receiver )HobbyKing
QUADBOT 4 LEGGED ROBOT CHASSIS (KIT)
| *Note | This kit does not include any control circuit |
| Length | 175mm |
| Height | 80mm |
| Width | 160mm |
| Servo Torque | 1.5kg/cm |
| Servo Spend | 0.1sec/60 Degrees |
Specs:, Servo Weight:8g, Servo Max Voltage:6V,
The QuadBot is a 4 legged spider chassis ideal for ...HobbyKing
HEXTRONIK DT900 BRUSHLESS OUTRUNNER 900KV
| Required Voltage | 11.1v |
| Max current draw | 35A |
| Max power | 400W |
| No Load Current | 1.2A |
| Shaft | M4 (perfectly suited to Towerpor/GWS SF Slow Fly props) |
| Weight | 80.0g |
| Diameter | 41mm |
| Overall length | 63mm |
: 900rpm/v,
Looks can be deceiving. This outrunner is around twice the ...5 Reviews
HobbyKing
NTM PROP DRIVE 13-12 2400KV / 40W
| Max current (Burst) | 3.9A |
| Max current (suststained) | 3.0A |
| Max Power | 40W @ 11.1v (3S) |
| Shaft | 1.5mm |
| ESC | 5~8A |
| Cell count | 2s~3s Lipoly |
Specs:, Model:, NTM Prop Drive Series 13-12 2400kv, Kv:2400rpm/v, Weight:5g, Mount type:, Tri-hole firewall mount (15mm width between mount holes), Connection:, Loose wire (for direct soldering), Prop Test Data:, 3.75x3 - 7.4V / 10W / 1.4A / 56g thrust,
NTM Prop Drive motors are rock-solid performance outrunners with tight ...5 Reviews
HobbyKing
NTM PROP DRIVE 28-36 1000KV / 400W BRUSHLESS MOTOR
| Motor Wind | 14T |
| Max current | 30A |
| Max Power | 400W |
| Shaft | 4mm |
| Weight | 89g |
| ESC | 30~40A |
| Cell count | 3s~6s Lipoly |
| Bolt holes | 16mm & 19mm |
Specs:, Model:, NTM Prop Drive Series 2836 1000kv, Kv:1000rpm/v, Poles:3, Bolt thread:M3, Connection:, 3.5mm Bullet-connector, Prop Test Data:, 11x7E - 11.1V / 220W / 20A / 976g thrust, Note:, An accessory pack is available for this motor. Please see the related items below.,
NTM Prop Drive motors are rock-solid performance outrunners with tight ...5 Reviews
HobbyKing
HEXTRONIK DT1000 BRUSHLESS OUTRUNNER 1000KV
| Required Voltage | 11.1v |
| Max current draw | 35A |
| Max power | 500W |
| No Load Current | 1.2A |
| Shaft | M4 (perfectly suited to Towerpor/GWS SF Slow Fly props) |
| Weight | 115g |
| Diameter | 41mm |
| Overall length | 66mm |
: 1000rpm/v,
Looks can be deceiving. This outrunner is around twice the ...3 Reviews
HobbyKing
HOBBYKING BL1230 5300KV BRUSHLESS INRUNNER MOTOR
| Battery | 3s (11.1v) |
| RPM | 5300kv |
| Max current | 8.5A |
| Diameter of shaft | 1.5mm |
| Length of front shaft | 8mm |
| Weight | 15.3g |
Dimension:, 30mm x 12mm, 38mm(with shaft),
This tiny inrunner packs a punch! Excellent choice for your ...HobbyKing
TURNIGY 3 FUNCTION 5 AMP UBEC VOLTAGE DISPLAY SWITCH
| Input voltage | 6—13V |
| 5.2/6V (default voltage | 5.2V ) |
| Output current | 5 Amps (MAX |
| Weight | 52g |
Specs:, Output voltage:, Volume:, 40mm x 27mm x 35mm,
This switch features an in built 5 Amp multi-voltage UBEC, ...5 Reviews
HobbyKing
ZYX-GS CAMERA GIMBAL STABILIZATION SYSTEM 3-AXIS GYRO/ACCELEROMETER
| Weight | 26g |
| Supported RC | PPM/PCM/2.4G |
| Operating supply | DC3.5V~9V |
| Operating current | 60mA |
| Operating temperature | -15º~65º |
| Max angular rate | 2000º/sec |
| Max acceleration | 16g |
| Refresh rate | 800Hz |
Features:, • Three axis MEMS gyro and accelerometer stabilization (pan/tilt/roll), Specs:, Size:, 38x29x13mm / 27x27x9mm, Control range:, -45º~45º (roll), -180 º ~180 º (pan), -135º~90º (tilt),
The all new ZYX-GS precision gimbal stabilization system provides dedicated ...5 Reviews
HobbyKing
TURNIGY 4 IN 1 TORX DRIVER SET 1.4~ 2.7
| Head | Torx (hexalobular) AKA Star Bit |
5 Reviews
HobbyKing
JC120 EVO GAS ENGINE W/CD-IGNITION 120CC/12.5HP @ 8,000RPM
| Bore/Stroke | 45 x 38 (x2) |
| Piston displacement | 120cc |
| Max. power | 12.5HP/8000rpm |
| Min. idle rotating speed | 1100rpm |
| Rotate Speed | 1,100rpm-8,000rpm |
| Spark plug | CM-6 style (x2) |
| Length from mount to propeller boss | 165mm |
| Mount Holes | 70mm x 80mm |
| Height from Crank Centerline to Carb Top | 120mm |
| Width (Spark Plug to Spark Plug) | 281mm |
Engine type:, Twin cylinder, 2-stroke, air-cooled, Carburetor:, Walbro choke type/diaphragm carburetor, Start mode:, Anticlockwise Push Prop Start, Weight:, 2620g (Complete except Ignition + 176g, Exhaust + 104g x 2 ),
JC120 Gas engine w/CD-Ignition 120cc/12.5hp @ 8,000rpm, nicely made, good ...HobbyKing
JC60 EVO GAS ENGINE W/CD-IGNITION 60CC/6HP @ 7,400RPM
| Bore/Stroke | 45 x 38 |
| Piston displacement | 60cc |
| Max. power | 6HP/7,400rpm |
| Min. idle rotating speed | 1900rpm |
| Rotate Speed | 1,700rpm-9,000rpm |
| Spark plug | CM-6 style |
| Length from stand off to propeller boss | 169mm |
| Stand 0ff | 70mm |
| Mount Holes | 60mm x 86mm |
| Height from Crank Centerline to Spark Plug Tip | 137mm |
Engine type:, single cylinder, 2-stroke, air-cooled, Carburetor:, Walbro choke type/diaphragm carburetor, Start mode:, Anticlockwise Push Prop Start, Weight:, 1440g (Complete except Ignition + 120g, Exhaust + 100g ),
JC60 Gas engine w/CD-Ignition 60cc/6hp @ 7,400rpm, nicely made, good ...5 Reviews
HobbyKing
JC30 EVO GAS ENGINE W/CD-IGNITION 30CC/4HP @ 9,000RPM
| Bore/Stroke | 36mm x 30mm |
| Piston displacement | 30cc |
| Max. power | 4HP/9,000rpm |
| Min. idle rotating speed | 1300rpm |
| Rotate Speed | 1,300rpm-9,000rpm |
| Electronic ignition | CDI |
| Spark plug | CM-6 style |
| Length from stand off to propeller boss | 160mm |
| Stand 0ff | 85mm |
| Mount Holes | 68mm x 54mm |
| Height from Crank Centerline to Spark Plug Tip | 125mm |
| Prop Range | 17x8 ~ 20x6 |
Engine type:, single cylinder, 2-stroke, air-cooled, Carburetor:, Walbro choke type/diaphragm carburetor, Start mode:, Anticlockwise Push Prop Start, Weight:, 920g (Complete except Ignition + 120g, Exhaust + 90g ),
JC30 EVO Gas engine w/CD-Ignition 30cc/4hp @ 9,000rpm, nicely made, ...5 Reviews